Description

The DLSewerLateralUpdateRules command updates the lateral rules for a lateral pipe. This allows a change to the lateral pipe rules.

Usage

Type DLSewerLateralUpdateRules at the command line. You will then see a dialog box like that below:

Lateral Parameters

These options determine how the lateral is linked to the main pipe object.

• Lateral Match Point
  Determines how the lateral adjusts to the main pipe object. The options are Top, Center or Invert.
• Lateral Rules
  When Apply Lateral Rules to Lateral Pipes is selected, the lateral pipe will be adjusted based on the rules specified.
• Minimum Grade
  Sets the minimum grade of the lateral pipe from the main pipe.
• Maximum Grade
  Sets the maximum grade of the lateral pipe from the main pipe.
• Minimum Cover
  The mimimum cover of the pipe at the opposite end of the lateral pipe from the main pipe. The end of the pipe is set at the minimum cover elevation.
• Maximum Cover
  The maximum cover of the pipe at the opposite end of the lateral pipe from the main line pipe. If the maximum cover is exceeded and and the maximum grade is met, the lateral pipe will be moved up to provide the maximum cover the pipe. The lateral pipe will then have a drop condition at the main line pipe.
• Use Minimum Cover
  The minimum cover of the pipe at the opposite end of the lateral pipe from the main line pipe will be used to control the grade of the pipe.
• Use Minimum Grade
  The minimum grade of the laterals rules will be used to control the grade of the pipe.

See Also

DLSewerLaterals

Creates links between main pipe networks and lateral pipe networks.

DLSewerLateralsManager

Updates the rules that a lateral pipe uses when updated in relation to a main line pipe.

DLSewerLateralUpdateRules

Updates the rules that a lateral pipe uses when updated in relation to a main line pipe.

DL3LineProf

Creates linked PVIs from one Profile to one or two other Profiles; particularly useful for creating linked center, left, and right profiles for Three-Line Profiles.

DLCoordConvert

Allows User Defined Properties on Cogo Points to be automatically populated with coordinates in alternate Coordinate Systems.

DLEnabled

Enables or disables the automatic updating of Dynamic Links for a drawing.

DLProfiles

Manages dynamic links between Profile PVIs and other Civil-3D entities. This allows the elevations of PVIs to change dynamically whenever the "master" object changes. The "master" object may be a Surface, another Profile, or an adjacent PVI on the same Profile.

DLRefresh

Refreshes all Dynamic Links in the drawing that are known to be out-of-date.

DLRefreshAll

Refreshes all Dynamic Links in the drawing.

DLRefreshItems

Refreshes all Dynamic Links attached to selected objects.