The CopyPoints command copies points in the drawing, duplicating all properties of the source point and using the Next Point Number setting. Points may also be selected by Point Group.
Type CopyPoints at the command line. At the prompt, select the points you wish to copy, or type "PO" to select points by Point Group. After selecting points, pick the Base Point and Displacement Point for the copy.
Move Civil-3D Point locations, with an option to select by point group.
Manages dynamic links between Cogo Points and other Civil-3D entities. This allows the elevations of Cogo Points to change dynamically whenever the "master" object changes. Similarly, the description may be set to display the Station/Offset of the point, and the Station/Offset will also dynamically respond to changes in the model. The "master" object may be a Surface, a Profile, an Alignment, or a linear entity such as a Feature Line, Survey Figure, Polyline, or 3D-Polyline.
Find and Replace text in the Raw Description for points.
Displays a list of available point numbers in the command window.
Set the next point number for point creation.
Add and/or remove selected Civil-3D Points to/from one or more existing Point Groups.
Manually create points with a variety of options, including getting the elevation from the pick point.
Rotate Civil-3D Point Markers.
Rotate Civil-3D Point locations, with an option to select by point group.
Rounds selected Cogo Point elevations to the specified interval.
Scales Civil-3D Cogo Points horizontally without applying a datum adjustment to the points.
Displays a list of used point numbers in the command window.
Zoom to a Cogo Point by typing the Point Name or Number in the command window.