SincpacC3D General Information Command Summary Quux Software



The SelPtGroup command selects Civil-3D Points by point group, so they can then be used in other commands.


Type SelPtGroup at the command line, and select the point groups from the list.


In the image below, the green points labeled "3TBC" are in the "Curb Calcs" point group.

SelPtGroup sample start

You will then see a dialog box similar to the one below. Select the desired point group(s) from the list, and hit OK. The numbers in braces indicate how many points are in each point group.

SelPtGroup Dialog box

In the image above, the "Curb Calcs" point group is selected, which selects all the curb points, as seen below:

SelPtGroup sample selected

Note that you may also run this command by selecting some points, right-clicking, and selecting "Select Points By Group" from the shortcut menu, as seen below:

SelPtGroup shortcut

See Also

Blue Dot AddPVIs

Add selected Civil-3D Points to an existing Profile as PVIs, or create a new Profile using the points.

Blue Dot FindPt

Find and Replace text in the Raw Description of Points.

Blue Dot IdPtGroup

Select a point and see a list of all point groups it belongs too. Also allows you to remove the point from selected groups.

Blue Dot PGAddRemovePoints

Add and/or remove selected Civil-3D Points to/from one or more existing Point Groups.

Blue Dot PGBrowser

Point Group Browser. Provides a quick way to flip through Point Groups, and edit the style and override settings. Also displays a Point List of all points currently in the group. The Point List may be edited to add or remove points from the group.

Blue Dot Pt2Feature

Datum-adjust points based on Feature Lines, 3D-Polylines, Survey Figures, or other linework.

Blue Dot Pt2Profile

Datum-adjust points based on Profiles.