Description

The DLRefreshItems command refreshes all dynamic links in the drawing.

Usage

Type DLRefreshItems at the command line.

This command is available to force a refresh of the Dynamic Links at any time, should they not appear up-to-date. It will also trigger an update of all Dynamic Links in the drawing when Dynamic links are disabled using the DLEnabled command.

See Also

DL3LineProf

Creates linked PVIs from one Profile to one or two other Profiles; particularly useful for creating linked center, left, and right profiles for Three-Line Profiles.

DLEnabled

Enables or disables the automatic updating of Dynamic Links for a drawing.

DLPoints

Manages dynamic links between Cogo Points and other Civil-3D entities. This allows the elevations of Cogo Points to change dynamically whenever the "master" object changes. Similarly, the description may be set to display the Station/Offset of the point, and the Station/Offset will also dynamically respond to changes in the model. The "master" object may be a Surface, a Profile, an Alignment, or a linear entity such as a Feature Line, Survey Figure, Polyline, or 3D-Polyline.

DLProfiles

Manages dynamic links between Profile PVIs and other Civil-3D entities. This allows the elevations of PVIs to change dynamically whenever the "master" object changes. The "master" object may be a Surface, another Profile, or an adjacent PVI on the same Profile.

DLRefresh

Refreshes all Dynamic Links in the drawing that are known to be out-of-date.

DLRefreshAll

Refreshes all Dynamic Links in the drawing.