Description

The SPCalcPipeSlopes allows the user to set the slopes of connected pipes to all be the same, calculated between the start and end pipes, as set in the command's settings. The existing start and end elevations for the pipes may be either reused or set to new values in the settings.

Usage

Type SPCalcPipeSlopes at the command line or select it from the Sincpac2 Ribbon Tab, Tools Panel, Pipes drop down. You will be prompted to select the Pipe Network Part to start from (may be either a pipe or structure), next you will be prompted to select the last connected part at which to terminate setting the slopes. At anytime during the selection process you may enter SE to get to the command settings. In the settings you have the option to set the start and end elevations to use, the amount of drop to apply at structures, whether to apply that drop at null structures, and which location of the pipes to match.

See Also

SwapPipeNetworkParts

Swaps multiple pipes or structures from one size to another size.

PipeElevationEditor

Allows editing of pipe invert elevations, ala FeaturelineElevationEditor style.