SincpacC3D General Information Command Summary
The RotateMarkers command rotates Civil-3D Points.
Type RotateMarkers at the command line. You will be prompted to select the points you wish to rotate. Hit RETURN or right-click to finish selecting objects. You will then be prompted to enter the angle you wish to rotate the point markers to.
Find and Replace text in the Raw Description for points.
Displays a list of available point numbers in the command window.
Move points in the drawing. Points are only moved horizontally, with no datum adjustment, and may be selected by Point Group.
Set the next point number for point creation.
Add and/or remove selected Civil-3D Points to/from one or more existing Point Groups.
Manually create points with a variety of options, including getting the elevation from the pick point.
Rotate objects to match a linear object. Each selected object is rotated to match the bearing of the closest point on the linear object.
Rotate selected objects. Each object is rotated individually around its insertion point. When used on Cogo Points, this command rotates the Point Marker. When used on MLeaders that have a single leader, the MLeader is rotated around the arrowhead.
Rotate Civil-3D Point locations, with an option to select by point group.
Rotate objects to match a selected object. May also be used to rotate objects to match segments of polylines, Feature Lines, Survey Figures, or Parcels. When selecting a linear object, all objects are rotated to match the bearing of the selected point on the linear object.
Rotate selected objects around a selected pick point by a set amount.
Displays a list of used point numbers in the command window.
Zoom to a Cogo Point by typing the Point Name or Number in the command window.