SincpacC3D General Information Command Summary
The RotateIndividual command rotates selected objects individually, with each object rotated around its insertion point. When used on Cogo Points, this command rotates the Point Marker. When used on MLeaders that have a single leader, the MLeader is rotated around the arrowhead.
Type RotateIndividual at the command line, and select the objects you wish to rotate. You may also run this command by selecting one or more objects, right-clicking, and selecting "Rotate Individual" from the "Sincpac Edit Commands" shortcut menu.
After you have finished selecting objects, right-click to end the selection. You will then be prompted for the rotation angle.
Similar to the "Flatten" command from the Express Tools, except this command also works on Civil-3D Cogo Points.
Flip objects 180 degrees.
Rotate objects to match a linear object. Each selected object is rotated to match the bearing of the closest point on the linear object.
Rotate objects to match a selected object. May also be used to rotate objects to match segments of polylines, Feature Lines, Survey Figures, or Parcels. When selecting a linear object, all objects are rotated to match the bearing of the selected point on the linear object.
Rotate selected objects around a selected pick point by a set amount.