SincpacC3D General Information Command Summary
The ZoomPt command zooms the display to the specified point number.
Type ZoomPt at the command line. You will be prompted to enter either the Number or Name of the Cogo Point to zoom to.
You may also hit ENTER without typing anything to enter a new height factor. The zoom height is determined by taking the current Annotation Scale and multiplying it by this number. Enter a lower number for the zoom height factor to zoom in closer to the point, or a higher number to zoom out further. The default zoom height factor is 4.
Find and Replace text in the Raw Description for points.
Displays a list of available point numbers in the command window.
Move points in the drawing. Points are only moved horizontally, with no datum adjustment, and may be selected by Point Group.
Set the next point number for point creation.
Add and/or remove selected Civil-3D Points to/from one or more existing Point Groups.
Manually create points with a variety of options, including getting the elevation from the pick point.
Rotate Civil-3D Point Markers.
Rotate Civil-3D Point locations, with an option to select by point group.
Displays a list of used point numbers in the command window.